MET ONE HHPC-2

The MET ONE HHPC-2 handheld particle counter is low cost, fast, light with easy access to particle counting data. The low cost MET ONE HHPC -2 handheld particle counter is preferred for clean room and indoor air quality monitoring professionals.
MET ONE HHPC-2 Handheld Particle Counter
Low cost particle counting – Save money on validation services
The MET ONE HHPC-2 handheld particle counter offers a low cost alternative for qualifying smaller clean rooms to ISO class 5 and indoor air quality applications.
Light weight ergonomic design – Reach those difficult HEPA filter leaks
The Met One HHPC-2 is small, light-weight and provides single handed operation for effortless particle counting troubleshooting.
Easily configurable for maximum flexibility
Set sample times to cubic feet or liters
Industry leading particle counting performance and quality
Accurate, reliable, traceable Instruments Eight hours of continuous battery operation Built-in filter to protect the clean room from pump exhaust Meets the most stringent performance standards set by the industry
Flexible communications – easy setup and data transfer
Data is easily downloaded to a computer or printer using the included RS-232/RS-485 interface cable and utility software
MET ONE particle counter reliability and service
With global calibration and service centers located in over 80 countries, you can be assured that your investment will be fully supported
2 Size Channels Standard 0.3 and 0.5 μ or 0.5 and 5.0 μ
IAQ 0.3 and 1.0 μ
Custom 0.3 to 10 μ or 0.5 to 15 μ or 1.0 to 20 μ
Flow Rate 0.1 CFM (2.83 LPM)
Light Source Laser diode; index guided (26,000 MTBF at 25°C)
Calibration PSL particles in air (NIST)
Counting Efficiency 50% @ 0.3 μm; 100% for particles > 0.45 μm (per JIS B9921:1997)
Zero Count 1 count/5 minutes (per JIS B9921:1997)
Coincidence Loss 5% at 2,000,000 particles/ft3
Measuring Mode Concentration: particles/liter; particles/ft3
Sample Volume Options 0.01 ft3 - 00:06 Minutes: Seconds (MM:SS)
28.3 L3 - 10:00 Minutes: Seconds (MM:SS)
10.0 L3 - 03:53 Minutes: Seconds (MM:SS)
2.83 L3 - 01:00 Minutes: Seconds (MM:SS)
User Interface 3-button keypad
Data Storage 100 sample records
Data Recorded Counts, calibration error
Display LCD, 4 x 16 character display
Alarms Low battery, calibration error
Sample Inlet Isokinetic probe
Interface RS-232 via RJ-45
Vacuum Source Internal pump, flow controlled
Housing Injection molded plastic
Dimensions 11.43 w x 20.96 h x 5.72 d cm (4.5 x 8.25 x 2.25 inches)
Weight 1.0 kg (2.2 lbs)
Environment Operating:  10°C to 40°C (50°F to 104°F), 20% to 90% relative humidity, non-condensing
Storage: -10°C to 50°C (14°F to 122°F), Up to 90% relative humidity, non-condensing
Power AC Adapter, 12 VDC at 2.5 A, 90 to 250 VAC, 50 to 60 Hz
Rechargeable Battery NiMH, 4.8V at 4.5 Ah
Battery Operating Time 8 hours continuous
Recharge Time 2 hours
Standards CE; JIS B9921: 1997
Name Type Language Date
MET ONE-HHPC-2 & HHPC-6 Brochure-English PDF English 22 Nov 2011
MET ONE-HHPC-2-Particle-Counter-User-Manual PDF English 22 Nov 2011

Additionally, by using PortAll Version 2 software, particle count data can be organized, archived and graphically trended.

PortAll Software
  • Data can be downloaded at the operator’s convenience from the 400-record buffer and displayed as a graph or a table in the built-in spreadsheet
  • Computer System Minimum Requirements:
    • Pentium® IV 1 GHz processor (Pentium IV 1.5 GHz is recommended)
    • Microsoft® Internet Explorer 5.x or greater
    • 512 MB RAM (1 GB RAM is recommended)
    • Windows® Vista or Windows XP Professional (SP2 or greater) operating system, including non-English implementations
    • A hard disk drive with at least 1.5 GB of free space (preferably 1024 x 768 resolution)
    • At least one available serial communications port