Benefits of selecting the MET ONE 6000P pumped remote air particle counter

Easy installation and reduced cost

Built-in pump allows installation anywhere without high cost vacuum pump requirements

Industry leading particle counting on-line reliability

ISO 21501 compliant with built-in flow sensor for CFR21 data accuracy and reliability

Flexible for all your remote air particle counter applications

Flexible particle count size in 0.3um or 0.5um sensitivity at 0.1cfm or 1.0cfm flow rates

Industry leading quality and reliability

Long life laser diode for guaranteed continuous monitoring

Easy to integrate with any facility monitoring system

Open architecture design to communicate seamlessly with your system. Multiple communication options: Pulse, Serial Modbus, Ethernet, Wireless and Analog

Number of Size Channels	Standard 2 or Optional 4
Light Source	Long Life Laser™ diode
Weight	4.62 kg (10.2 lb)
Dimensions	17.15 x 11.43 x 31.75 cm (6.75 x 4.5 x 12.5 inches)
Enclosure	Stainless Steel
Power Requirements	24 VDC ± 10% or 100 to 230 VAC 50/60 Hz (source: Class 2 limited energy, <150 VAC)
Power Consumption	50 W DC, 7.9 W AC maximum
Operating Temperature	10 to 32 °C (50 to 90 °F), 5 to 95% relative humidity, non-condensing
Storage Temperature	-40 to 70 °C (-40 to 158 °F), 5 to 98% relative humidity, non-condensing
Signal Output Options	Analog 4–20 mA, Ethernet with TCP/IP protocol
Pump Type	Air Vacuum, rated for continuous use
Flow Control	Micro processor with Differential Pressure sensor
Coincidence Loss	5% at 2,000,000 particles/ft3 - 5% at 400, 000 particle/ft3 - (14,000,000 particles/m3)
False Count Rate	One or less in five minutes
Status Indicator	Multi-colored LED for normal status, count alarm, count alert, sensor failure, flow failure or communication failure
Accessories Included	Isokinetic Probe, Purge Filter, Configuration Kit, Operator Manual

Included Accessories

Part Number	Description
2088598-03	6000P Ship Kit including isokinetic probe, purge filter, power cord, connectors
2088516-02	6000P Configuration Kit includes: configuration cable, software and user manual

Optional Accessories

Part Number	Description
2088601-15	4 size channel option
VP623501	AC power cord set, 115V
VP623500	AC power cord set, 230V
2088480	Bracket, to mount external LED light stack with isokinetic probe
2088482	Bracket, wall, for external LED light stack
2082644-3	Bracket, wall, type T, for isokinetic probe
460-400-7004	Cable, for external stainless steel LED light stack, 4m with connector
2088379-01	Cable, service port
410-400-1507	DC input and/or Analog input connector
590815	Fuse, T-2A 250V
2088594	Inlet nozzle, 3/8”
2088396-01	Light stack, stainless steel, external LED
2080999-3	Probe, extended – vertical wall mount, 1.0 cfm, 12”
2080999-4	Probe, extended – vertical wall mount, 1.0 cfm, 16”
2080999-9	Probe, extended – vertical wall mount with bracket for indicator light stack, 1.0 cfm, 12”
2080999-1	Probe, extended – vertical wall mount with bracket for indicator light stack, 1.0 cfm, 16”
2082646-2	Probe, isokinetic 1.0 cfm, 1/4"
2084148-01	Probe, isokinetic 1.0 cfm, 3/8"
960200	Tubing, 1/4 inch ID
960380	Tubing, 3/8 inch ID

ISO 14644 Compliance

• ISO 21501 compliance ensures you are proactively compliant to the next revision of ISO14644

  Aseptic Cleanroom Manufacturing

• The MET ONE 6000P pumped remote air particle counter is specifically designed to manage all aseptic fill cleanroom fixed location applications

  Semiconductor Cleanroom Environments

• Industry’s most accurate particle counting fully complies to ISO 21501 calibration standards, the MET ONE 6000P pumped remote air particle counter assures increase yield

  Flat Panel Cleanroom Environments

• Increase yield and eliminate contamination concerns in your flat panel production area with the MET ONE 6000P pumped remote air particle counter

  Hard Disk Drive Cleanroom Environments

• The MET ONE 6000 pumped remote air particle counter provides low cost of ownership price-per-point particle counting with industry leading high quality